Control & robotics

Bike Robot

A robot motorcycle balanced by a reaction wheel

A self-balancing robot motorcycle at about 1:8 scale. A reaction wheel is designed to keep it upright at standstill and while it drives; it lifts itself off a 3° side stand, steers with a servo and is driven over Wi-Fi from an Android phone or a Windows PC.

  • In development
  • Level: Advanced
  • Version: 0.1.0

Design v0.1.0: simulated and checked in CAD; the first unit is not built yet

The experience

Try both apps first with the bike emulator, a simulated bike that speaks the same protocol. Then print the frame, fork, swingarm, rims, TPU tyres and the guarded reaction-wheel disc, and fit two M5Stack Roller485 Lite motors, a steering servo and the CoreS3 as tank and dashboard. Press ARM: the bike is designed to spin its reaction wheel, lift itself off the 3° side stand and balance at 400 Hz. Drive it with two thumbs in BikePilot or with the keyboard in BikeStudio, watch the lean, the wheel speed and every controller term 50 times a second, switch LQR ↔ cascade PID, and read the ten-chapter course in the LEARN tab to find out why one wheel-speed gain looks wrong-way.

What makes it special

Reaction-wheel balance

A Ø 100 mm printed disc with steel masses, driven by a BLDC motor with FOC, holds the bike upright at standstill and while it drives.

Stands up by itself

From a 3° side stand the wheel's torque lifts the bike to vertical: in 0.20 s in simulation. Feet for 2° and 4° stands are included.

Two controllers, one law

LQR (the default) and a cascade PID, switchable on the fly. With the default gains they are the same controller written two ways.

Phone and PC control

BikePilot on Android and BikeStudio on Windows share one protocol library. STOP works from any connected app, the HUD and the kill switch.

Safe without the link

The loop always runs on the bike. Losing Wi-Fi stops driving after 0.3 s, and without a pilot for 30 s the bike parks itself on a stand.

Steering physics

Turns use a coordinated-turn lean feedforward and a speed-dependent steering limit; the theory covers counter-steering, trail and self-stability.

What you will learn

  • Bike geometry: wheelbase, rake and trail
  • Roll dynamics: the bike as an inverted pendulum
  • Reaction wheels: momentum, saturation and sizing
  • PID balance, anti-windup and the cascade form
  • State space and LQR: choosing Q and R
  • Attitude estimation with gyro and accelerometer
  • Steering, counter-steering and coordinated turns
  • BLDC motors, FOC and current control as torque

Three ways to get it

Be the first to build the Bike Robot

This kit is still in development. Leave your contact and we will write to you when it is released.

DIY: files and software

The whole build is yours: print the parts, buy the components, build the electronics and assemble the machine.

You do
Print, source the components, build the boards, assemble
  • Print files of every part (STL, STEP and 3MF)
  • Electronics design: wiring, schematics and the list of components
  • Firmware and software, including the app when the kit has one
  • Assembly manual
Notify me

Kit: electronics ready

The hard part comes done: every component, with the electronics assembled and tested. You print the parts and put the machine together.

You do
Print the parts and assemble
  • Everything in the DIY option
  • Every component on the bill of materials: electronics, cables and hardware
  • Electronics assembled and tested, ready to connect
  • Filament not included: you print the parts
Notify me

Ready to use

Printed, assembled and tested by us. Install the software and start using it.

You do
Install the software and use it
  • The complete machine, printed and assembled
  • Tested before it leaves the workshop
  • Firmware installed; app, manual and files included
Notify me

Price on request: it depends on the option. In the DIY option the filament, the electronics and the hardware are yours to source (this page lists them); in the kit option, only the filament.

Included with every option

The files, the manual and the software come with every option, the ready-to-use machine too.

Print files

  • STL files for every printed part: frame, fork, swingarm, rims, TPU tyres, wheel disc and guard
  • Two-colour 3MF armor plates with the yellow mech livery
  • STEP files of the assembly and of each part
  • Stand feet for 2°, 3° and 4°
  • Firmware for the M5Stack CoreS3

Assembly manual

  • Build guide with every part, fastener and step
  • Bill of materials and wiring diagram
  • First power-up checklist: IMU axes, motor directions, steering trim, stand calibration
  • 13 lab experiments
  • Safety notes: the reaction wheel, LiPo handling, the kill switch

App

BikeStudio + BikePilot Windows Android

  • BikeStudio: lean gauge, flag lamps and live charts of the lean, the wheel speed and every controller term
  • BikeStudio: ARM / PARK / STOP, keyboard driving, lean-step and torque-pulse tests
  • BikeStudio: calibration, Wi-Fi setup, CSV recording and an event log
  • BikeStudio: LEARN tab with the whole theory course, offline
  • BikePilot: two-thumb driving, ARM / PARK and an always-visible STOP
  • BikePilot: telemetry HUD with lean, state, wheel speed, battery and link quality