Help

Support

How to get from the download to a working machine, and what to do when something does not go as planned.

First steps

  1. Check the pack

    Open the files and read the manual once before you print: it tells you which parts, in what order.

  2. Print

    Load the 3MF files in your slicer. For the two-colour plates, assign one filament to each part.

  3. Build

    Gather the hardware from the bill of materials and follow the build guide and its checks.

  4. Connect

    Install the app, connect to the kit and confirm that the readings make sense before the first run.

Before you choose

What do I get with a kit?

Every kit is sold in three options. DIY: the print files, the electronics design with the list of components, the firmware and the software; you print, source and build everything. Kit: the same, plus every component, with the electronics assembled and tested; you print the parts and assemble. Ready to use: the machine printed, assembled and tested; you install the software and use it. Every option includes the assembly manual and, when the kit has one, the app for Windows or Android.

Are the electronics and the hardware included?

In the kit and ready-to-use options, yes: every component on the bill of materials comes with them. In the DIY option they are yours to source: each kit page has a section with what you need, and the manual has the complete bill of materials. The filament is included only in the ready-to-use option, which arrives printed.

And the 3D models?

They come in two options: the print files with the assembly manual, to print on your own printer, or the object printed and assembled in our workshop, with its hardware.

What does "In development" mean?

The kit is designed, but it is not released yet. Its page says exactly how far it has come, for example whether a first unit has been built. Until a kit is built and measured, its numbers are design values or simulation results, and the page says so. You can ask to be told when it is released.

How do I get a kit?

Use the button of the option you want on the kit page, or the contact form: say which kit and which option, and we reply with the price, the availability and how to get it.

Printing

Which printer do I need?

A filament (FDM) printer with a bed large enough for the biggest part of the kit. The kits are designed on a printer with a build volume of 260 × 260 × 300 mm. If your printer is smaller, ask us before you choose.

How does the two-colour livery print?

The markings are inlaid 0.6 mm deep in a second filament. They come as two-colour 3MF files for a multi-material printer: in the slicer, each part of the file gets its own filament. The livery sits on flat plates that print face down, so the colour changes stay in the first layers.

A part does not fit. What now?

Write to us with the name of the part, your printer, slicer and filament, and a photo. Fits depend on how each printer is calibrated, and we would like to know when one is too tight or too loose.

Electronics and apps

Which electronics do the kits use?

The machines with a controller are built around M5Stack units, such as the CoreS3 and the AtomS3R. The data sheet on each kit page names the controller, and the section "What you need to source" lists the main parts.

On which systems do the apps run?

On Windows, on Android, or on both, depending on the kit. The page of each kit shows the name of its app and its platforms. Some kits work without an app.

Where is the theory?

In the app, when the app of the kit has a course built in: you read a chapter next to the live data of your machine. In the other kits the course comes with the manual. The page of each kit says where its theory is.

When you need us

Something does not work. How do I ask for help?

Use the contact form with the subject "Technical support". Tell us the kit and its version, what you expected and what happened. A photo or a screenshot of the app helps a lot.

I have a complaint or a suggestion.

Both are welcome. Choose "Complaint" or "Suggestion" in the contact form, so the message reaches the right place at once.

Did not find the answer?

Write to us with the kit, its version and, if you can, a photo of what you see.