Light wall panels and objects that hang anywhere on a 30 mm grid
A 3D-printable wall organizer: light, stiff panels screwed to the wall, and hooks, a tool rack and bins that hang on them anywhere on a 30 mm grid. Objects go on with one movement (push in, let drop, click) and come off with one lift. Panels join edge to edge to cover a larger area.
In development
Level: Beginner
Version: 0.1.0
v0.1.0 design, checked in CAD, not printed yet. Load capacity and lock forces are estimates from the model.
WO-01 example wall: two panels with hooks, a tool rack and two bins
The experience
You begin small: two 2 × 2 test panels, two keys and one hook. Press the keys in to join the panels, hang the hook (push it in, let it drop, hear the click) and feel how firm a lift it takes to come off. If something is loose or tight, one parameter in the model fixes it. Then you print the big panels face down, with the yellow livery in the first layers, and the hooks, tool rack and bins upright, all without supports. Hold the first panel on the wall, mark through its holes, drill, plug and screw it flat; key the next one beside it and the grid runs on across the seam. Along the way you learn how a T-peg and keyhole joint carries a load, how a spring tongue printed in the part makes a lock, and how a rib waffle makes a panel stiff with little filament. WO-01 is a design release, not printed yet.
What makes it special
One connector for every object
Every object has T-pegs on its mount plate and every panel cell has a keyhole. Push the object in 6.5 mm above its place and let it drop: the peg heads catch behind the bars.
Locks against lifting
A nub on a spring tongue, cut in the mount plate, clicks in as the object drops. Pulling a tool out does not lift the holder; a firm lift (about 17 N, estimated) releases it.
Light and stiff panels
A 2 mm front grid, 55 % open, on an 8 mm deep waffle of ribs. An 8 × 8 panel (240 × 240 mm) is about 126 g of PLA: 2.2 kg/m².
Panels join into any area
Square keys press into half-pockets on every edge and line the panels up, so the grid runs on without a step and objects can hang across a seam.
Screw and wall plug
Mount cells take a 4.0-5.0 mm countersunk screw in a 6 or 8 mm wall plug. The head sits under the face, and the panel is its own drilling template.
No supports, mech livery
Objects print upright as they hang, panels face down. Yellow targets, the unit code and the panel size are inlaid 0.6 mm in the panel's front face.
What you will learn
How a T-peg and keyhole joint carries a load
A spring lock printed in the part itself
Stiffness per gram: a front grid on a rib waffle
Joining panels so a grid runs on across the seam
Fixing to a wall with screws and wall plugs
Print poses that need no supports
Two ways to get it
Be the first to build the Wall Organizer
This model is still in development. Leave your contact and we will write to you when it is released.
Print files
The model of every part, ready for your printer, with the assembly manual.