3D printing workshop

Drawer Unit for Creality Hi

Two push-to-open drawers under your Creality Hi, printed on the Hi itself

A 3D-printed base made for the Creality Hi, with two 2.9 L push-to-open drawers and no handles. It follows the outline of the printer's base, every part prints on the Hi without supports, and the fronts carry a two-colour mech livery.

  • Available
  • Level: Intermediate
  • Version: 1.1.0

v1.1.0: the whole unit is printed and works under a Creality Hi. The optional divided bin is not printed yet.

The experience

You start small: print one latch cartridge, four parts and a spring, and feel the push-latch-push-release cycle in your hand. Then you print the rest on the Creality Hi itself: plinth, carcass segments, bins and white armor plates with yellow mech livery, 26 prints with no supports. You set heat-set inserts, screw the carcass to a plinth with staggered seams and watch separate pieces become one stiff base. The printer stands on top with its feet in the pockets. Push a drawer and it locks flush; push again and a spring throws it out 29 mm. On the way you learn how a heart-shaped cam latch works and how to split a big design into parts that fit the bed.

What makes it special

Push to open

Push a drawer shut and it locks flush. Push again and a spring throws it out about 29 mm. The latch is a printed heart-shaped cam.

Shaped like the printer

290 × 390 mm with 25 mm corner radius, 110 mm tall. The Hi stands on a stiff sandwich deck with its four feet in pockets.

Prints on the Hi

20 different printed parts, 26 prints in all, none over 225 mm in X/Y or 195 mm tall, and no supports anywhere.

Two 2.9 L drawers

Each drawer is about 370 mm deep, made of two bins bolted back to front. The double wall in the middle works as a divider.

Mech livery

Drawer fronts and four side plates are white armor plates with yellow markings inlaid 0.6 mm: unit code, bay numbers, PUSH targets, hazard stripes.

Optional divided bin

A front bin with four 57.6 × 88.8 mm compartments and rounded floor edges for small parts. Checked in CAD, not printed yet.

What you will learn

  • How a push-to-open heart-cam latch works
  • Splitting a large design into parts that fit the bed
  • Designing parts that print without supports
  • Staggered seams for a stiff printed structure
  • Heat-set inserts and screw joints in printed parts
  • Multi-colour printing with a 0.6 mm inlaid livery

Two ways to get it

Get the Drawer Unit for Creality Hi

Choose how much of the build you want to do yourself. Tell us the option and we will reply with the price, the availability and how to get it.

Print files

The model of every part, ready for your printer, with the assembly manual.

You do
Print, source the hardware, assemble
  • Print files of every part
  • Assembly manual with the list of hardware
I want this option

Printed and assembled

Printed in our workshop, assembled with its hardware and ready to use.

You do
Unpack it and use it
  • Every part printed, with the hardware
  • Assembled and checked
  • Print files and manual included
I want this option

Price on request: it depends on the option. In the print files option the filament and the hardware are yours to source (this page lists them).

Included with every option

The print files and the manual come with both options.

Print files

  • STL for every printed part, already in its print pose
  • Six two-colour 3MF armor plates with the mech livery (plate + inlay)
  • STEP of the assembly and of every part
  • The optional divided front bin, as STL and STEP

Assembly manual

  • Build guide with the full part list and sizes
  • Print settings for each group of parts
  • Hardware list and bill of materials
  • Step-by-step assembly, starting with a test of the latch
  • How the latch works, with a diagram of the cam track and the pin path