3D printing workshop

Modular Drawer Organizer

Push-to-open drawers that stack on the desk, under it or on the wall

A 3D-printable modular drawer system for the desk top, under the desk or the wall. Boxes of three heights join with one universal printed key, every drawer is push-to-open, and each front is a two-colour mech armor plate with a label window.

  • In development
  • Level: Intermediate
  • Version: 2.0.0-design

v2.0 design, checked in CAD, not printed yet. Only the latch cartridge has been printed and tested.

The experience

You begin with two test prints: one key and one latch cartridge. Slide the key into its dovetail groove, feel it snap, and try the push-latch-push-release cycle by hand. Then you print boxes in three heights standing on their back face, bins with 1, 2, 4 or 16 compartments, and white armor fronts with yellow mech livery, all without supports. You key boxes on top of and beside each other, add a mount plate or a wall bracket, and slide a paper label behind each window. Along the way you learn how a heart-cam latch works, how one joint profile can serve a whole system, and why a 35 mm height grid lets two small boxes equal one tall one. MDO-2 is a design release, not printed yet.

What makes it special

Push to open

Push a drawer shut and it locks flush. Push again and a spring throws it out 29 mm. It uses the printed heart-cam latch of the HD-01 drawer unit.

One key joins everything

Every face has the same pair of dovetail grooves. One printed key joins box to box, mount, side plate or tray, and snaps into notches.

Three heights, one grid

Boxes are 210 × 220 mm and 70, 105 or 140 mm tall, in 35 mm units, so two 1x boxes stack to exactly one 2x.

Desk, wall or under-desk

One mount plate works on the desk top or, turned over, under the desk. A wall bracket goes under and on top of a stack, with 12 mm of adjustment.

Labelled mech fronts

White armor plates with yellow livery inlaid 0.6 mm and a 72 × 20 mm window for an 80 × 30 mm paper card, printed from an A4 template.

Drawer variants

Open, 2 or 4 compartments in every height, and 16 compartments in the 1x height.

What you will learn

  • How a push-to-open heart-cam latch works
  • Dovetail keys and snap fits as a universal joint
  • Designing a modular system on a height grid
  • Testing clearances with small prints before big ones
  • Print poses that need no supports
  • Two-colour printing with a 0.6 mm inlaid livery

Two ways to get it

Be the first to build the Modular Drawer Organizer

This model is still in development. Leave your contact and we will write to you when it is released.

Print files

The model of every part, ready for your printer, with the assembly manual.

You do
Print, source the hardware, assemble
  • Print files of every part
  • Assembly manual with the list of hardware
Notify me

Printed and assembled

Printed in our workshop, assembled with its hardware and ready to use.

You do
Unpack it and use it
  • Every part printed, with the hardware
  • Assembled and checked
  • Print files and manual included
Notify me

Price on request: it depends on the option. In the print files option the filament and the hardware are yours to source (this page lists them).

Included with every option

The print files and the manual come with both options.

Print files

  • STL for every printed part in its print pose: boxes in three heights, bins, key, mounts and top tray
  • Two-colour 3MF files for the drawer fronts and side plates, with the mech livery
  • STEP of three example assemblies (desk, wall, under the desk) and of every part
  • The four latch cartridge parts, the same files as the HD-01 latch

Assembly manual

  • Build guide: part list, print settings, hardware and assembly steps
  • Mounting instructions for the desk top, the wall and under the desk
  • A4 template to print the 80 × 30 mm label cards
  • Design notes explaining each choice of joint, mount and dimension
  • Bill of materials of the desk example